How to Organize a pool, Water Systems

Pools.
Pools differ from other water bodies so that they do not transplant plants. Usually, pools are for swimming. The main pool is a decorative piece bottom, so this type of reservoir should be placed in a location clearly visible from the bottom. The form of the basin may be correct, and arbitrary, depending on the general style of the garden. On the site, dominated by straight lines, the pool can make a round or any shape, rectangular or square. Swimming pool with simple geometric or rounded forms must comply with the overall style of the house and garden. Like the interior of the house, swimming pool and its surroundings reflect the taste and image of its owner.

In landscape design, swimming pools are used: a concrete bowl, a bowl of the glass and precast-panel pools.

The walls and bottom of the pool (if it is placed on the street) are mostly covered with PVC - films of different colors. When choosing her colors are most often used various shades of blue and green colors, which create the impression of depth and coolness. Keep in mind that the darker the color of PVC - the film, the more it will seem Pool. Modern styles of open garden pools require a special elegance pools. This is achieved by a combination of color PVC - films of the pool and the marble decoration of his entourage. Lovers of bright colors will satisfy photosensitive mosaic (often used for indoor pools), which creates a rainbow pool play. As for the frame around the perimeter of the pool, it can be done in mosaic, natural stone exotic wood or concrete blocks - the coping stone.

Modern styles involve swimming pools, around which have a place to relax, barbecue veranda with table and canopy beds, umbrellas. Landscape should be designed in such a way that was created around the pool walking area, not allowing leaves and twigs in the rain and windy weather, and fall asleep pool. Pool can be protected by a covering in the form of the pavilion or coatings in the form of blinds that fully cover the surface of water after using a swimming pool.

The plants are planted around the pool, so to hide pool from prying eyes, create the appearance of the protected area, the illusion of peace and solitude. Sometimes one side of the pool are doing with wide steps (Roman staircase), silently, plunging into the clear water. However, it should be remembered that, despite the decorative stair always especially slippery and require attention and special care.

It is important to draw pool so that in the fall and spring, he gave the impression of irrelevance and abandonment. Especially well you can decorate your pool with perennial ornamental shrubs with colorful foliage and evergreens. If the pool in the garden are functional load - the pool will be a wonderful decoration of your estate all year round. Lush greenery, clean water, as well as attractions create a pleasant atmosphere to meet friends and family.

Pools with concrete bowl
Stages of construction of reinforced concrete the pool:
1. Layout of excavation.
2. Digging pit - excavation work is carried out Excavating (if space allows), followed by excavation is finished by hand. The shape of excavation should be form the basin. The size of the pit on the length and width must be greater than the size of the pool at the 0,5 - 0,7 m on each side.
3. Manufacturing base for the pool - bank filling gravel 15 cm thick concrete screed or thick-10cm.
4. Reinforcement - reinforcement (8-A-III GOST5781-82, 10-A-III GOST5781-82, 12-A-III GOST5781-82, 14-A-III GOST5781-82, depending on the shape of the size of the pool) binds haywire step 200x200 mm. First, reinforced bottom of the pool, then pool wall. Reinforcement conducted in two rows with subsequent binding of these series together.
5. Putting the formwork - formwork for the pool can be of three types: special reusable metal formwork, and made of waterproof plywood or boards.
6. Concreting - fill the pool made gidrobetonom brand V25P4 W-6. The process of concreting the pool must be continuous. And only in the basins of complex shape, which is not possible to set the formwork walls immediately allowed to die a separate floor and walls of the pool.
7. Removal of formwork.
8. Performing internal waterproofing (optional) and an outer sealing the pool (if necessary).
9. Backfilling and compaction of the earth around the pool.
Finish any kind of finishing materials.

Benefits of swimming pools with concrete bowl:
The only kind of bowl that can be decorated with any type of finishing materials.
Can be made pool of any size and shape.
Reliability and durability.
When conducting exterior waterproofing measures can be built and high groundwater.
The possibility of manufacturing as the overflow and skimmer type pool.
Disadvantages pools with concrete bowl:

High cost.
The biggest time of manufacture.
All are taken to make, but the build quality can only specialists.
Recommendations:

Can be used for swimming pools are located both indoors (usually), and on the street (at least).

For all swimming pools to water the most important thing is that it has always been clear, for this system in the basin need to mount a water purification system , the so-called water filters, which will be to clean water in the basin, but for a proper organization of the pool until all the above parts need to add a drainage system (pipes, taps, valves and valve) on which will take water to water treatment systems, and with help of which you can pour water from a swimming pool and fill it again.

pool cover